Sanyo SR3770S Accidentally pierced evaporator coil

Hi Everyone,

I just joined the forum because I have a problem.

I was defrosting a mini-fridge for a friend and I was chipping away at the ice with a screwdriver and mallet. (The entire freezer was a block of ice.) I was being gentle, knowing that I didn’t want to screw up any of the hardware, but the screwdriver slipped and pierced the metal that separates the freezer from the refrigerator. (Since it is a mini-fridge, there’s only one door and then the freezer is partitioned within.) The metal is ribbed and when it pierced, gas shot out, which I am assuming was the refrigerant.

I was originally thinking, oh well, don’t really need the freezer anyways, but there probably are not separate refrigerant holders for each section and if I run it as is, the compressor is going to burn out, right?

So, I’ve been trying to figure out if I can just replace this part, but this refrigerator seems to have been discontinued. Does anyone know where I can find parts?

Thanks,

Jeff

Attached Thumbnails

Click image for larger version. 

Name:	IMG_4316.jpg 
Views:	N/A 
Size:	250.8 KB 
ID:	31987
 

Click image for larger version. 

Name:	IMG_4317.jpg 
Views:	N/A 
Size:	200.3 KB 
ID:	31988
 

Click image for larger version. 

Name:	IMG_4318.jpg 
Views:	N/A 
Size:	273.9 KB 
ID:	31989
 


Source: New feed

Continue Reading

Refrigerator not cooling

I have a Kenmore Elite refrigerator model number 795.71033.010 it’s not cooling and a clicking sound is coming from the control board. Any suggestion…

[[ This is a content summary only. Visit my website for full links, other content, and more! ]]
Source: New feed

Continue Reading

Water Heater Repair in Queens

Natural_gas_storage_water_heaterPurchasing a home is a big responsibility for the homeowner and their family, and the maintenance can be time consuming and expensive. When a problem is discovered it should be corrected as quickly as possible because other issues and concerns can occur as a result. For example, if there is a small leak in the bathroom, the owner will often have to pay more on the water bill, especially when the leak gets bigger. Therefore, it is important for the homeowner to take care of these small and seemingly insignificant repairs before they grow in complexity and in cost.

Common Problems in an Older Home

Some of the most common problems in a home can affect the roof and floors. For instance, there may be damaged shingles on top of the home or large holes in the roof. The floors may also need to be replaced due to both wear and tear. One of the first places that the owner may start is inspecting the water heater in the kitchen. Inspecting the water heater for problems in advance can keep down in added problems.

Avoiding Problems with the Water Heater

Water heater repair jobs are also common to many homes and they must be corrected as soon as the owner knows that they exist. Delaying a fix in this area can cause a wide variety of inconveniences to the homeowner as well as everyone in the family. For instance, the family will not have hot water to take care of a wide variety of different chores (i.e. hot water is used to wash dishes, the family’s clothing and to take hot and warm baths and showers on a daily basis. Therefore, if the owner of the home wants to prevent various disruptions in the home, they should take water heater repair problems seriously.

Water heater repair may be simple to fix if the owner of the home is familiar with plumbing problems. Knowing how to fix the problems in-house can save additional money and time. On the other hand, if water heater repair services have to be called for evaluation and repairs, the homeowner may spend large sums of money. To reduce the cost of these repairs and the associated labor involved, the owner of the home should shop around for the best service in the local and surrounding areas. The main objective when shopping around is to save money, while also finding a reputable water heater repair service that perform quality work. If the owner of the home does not find the right company for the job, they may have to pay additional money in the future for more repairs. When this occurs, it can cause more inconvenience, as well as more frustration.

Searching the Internet for Professional Water Heater Repair

Searching the Internet for information and solutions is a common activity. Users can find answers to a wide range of different problems and products. From finding a good reputable dentist to locating parts for an old car, the Internet has a vast amount of valuable information. With this being said, one of the first places people look today for an answer is the World Wide Web, since they can buy things that they need online and find many types of services. Hence, finding the best water heater repair service company has been made simple. In fact, there are many blogs, forums and sites dedicated to different types of plumbing problems and concerns. They are also available to those who want to inquire about specific information. For instance, if the individual is located in a specific area with the U.S., they may ask about various kinds of plumbing information, specifically about reputable water heater repair services in their area.

When entering their questions and concerns online, the user can receive a response from others in their immediate area. Many times, the responses that they receive will often come quickly and they may receive great ideas or valuable recommendations. Therefore, when the people ask about specific companies within a specific location, users may respond with companies that offer great prices, while also providing quality services. On the other hand, these same users may also provide a list of companies that these homeowners should avoid. In either case, the homeowner can secure the information that they are looking for. Word of mouth and Internet recommendations are normally taken quite seriously.

Do-It-Yourself and How to Sites

Before the individual looks for a water heater repair professional, they should look for do-it-yourself sites. Many times people can fix minor problems themselves if they only knew what to do. For instance, they can fix some of their water heater repair problems by simply replacing a defective part, if it is easy to get to. Therefore, the most time-consuming task involved in fixing a faucet may be going to the local hardware store to pick up the new water heater part up. Once the person secures the part, it may only take five minutes to repair after the get home (i.e. replace the old part with the new).

When the problem is more complex, the owner may still only need to research online the steps involved. If it is a common problem, the homeowner may find this information on a dedicated site. The steps in the process may be very simple to follow and perform. Hence, the homeowner can save on the cost of repairs.

If the repair problem takes more expertise to repair, the owner of the home should look for an affordable professional repair services provider. The cost of the repairs may be more expensive, but it better to have it done right the first time. Also, this type of repair can be risky and dangerous if the person does not know what they are doing.

Saving money on water heater repairs is possible, but just ensure that you know what you are doing before you begin taking apart a water heater yourself – you may end up doing more damage than good.

Continue Reading

RMOTC Partners with Bear Appliance Repair

Overview of Bear Appliance Repair in the Bensonhurst neighborhood of Brooklyn, NY

Bear Appliance Repair is a subsidiary of Bosch and Siemens Home Appliance Group (BSH). They have been providing award winning appliance repair for over 75 years. Their product line ranges from built-in coffee makers, to ventilation equipment. Thermador products can be purchased from most major retail stores as well as independent dealers. They pride themselves on their innovative designs and high quality appliances that are eco-friendly and energy star efficient. For services contact them directly, let them know who recommended you and receive 25% off your next appliance repair.

Bear Appliance Repair’s Brand History

In 1916, William Cranston founded the Bear Appliance Repair brand. When the company was first established Cranston began producing electronic items such as portable and built-in heaters. In 1932, Bear Appliance Repair began as Cranston and merged with another business owner to form the Roesch Electric Repair name. The first wall oven and cooktop were created by them in 1947. Over the years Bear Appliance Repair has continuously modified and expanded its repair product line in order to meet customer demand and exceed their expectations.

Continue Reading

Express Appliance Repair Services in Queens

Bear Appliance Repair Serves Residents in Queens and is located in Brooklyn, NY

Having a working stove is a luxury that many of us take for granted. When things start to go wrong with your oven or stove top, it can be very frustrating to figure out what exactly to do. You will probably need to have a professional repair person come and perform the actual fixes on the stove, but there are many ways that you can actually troubleshoot to narrow down what they problem might be. Bear Appliance Repair offers professional appliance repair in Queens and is available for such circumstances, but let’s take a look at all the things that can go wrong with the stove top and oven first.

Appliances which are used for cooking come in various styles. One type of stove is the gas stove, another type of stove uses electricity. This article will focus on the problems that can come up , as well as possible fixes, with the gas stoves. Gas stoves are designed to be ready for the natural gas that they will receive but some also have extras that come with them. The way a gas stove works is that the gas is released through a regulator into the stove. The pressure regulator on the stove essentially allows the right amount of gas out to reach the stove. Appliance repair Staten Island are specialists in dealing with these pressure regulators as well as many other aspects of gas stoves.

Pilot Ignition Ovens

Pilot ignition ovens work by allowing gas to escape from a valve at just the right time. They also are able to turn the burner on and off while keeping the right temperature. These types of ovens aren’t used as much these days because there is concern about them being constantly giving of flames or gas. There is often an object called a thermocouple located within this type of oven. This thermocouple makes electricity out of heat with a valve.

Sometimes the thermocouple ceases to work within the pilot ignition oven. This is a relatively common problem that people have reported experiences with when using this kind of stove. Appliance repair Staten Island can help solve this problem. Another problem that can happen is that the pilot flame isn’t giving off enough heat to work the thermocouple. A quick fix can be to just push the temperature knob in to relight the flame in the pilot. Appliance repair Staten Island can be the solution for a lot of these common oven problems you may experience.

Electronic Ignition Ovens

Electric ignition ovens work in a different way in that they use a glow bar for an igniter. This igniter bar gets hot, which in turn gives the electricity that the stove needs. The next thing that happens is that the electricity that was generated goes through a glow bar and makes the igniter expand. This lets the electricity go through a valve to reach the oven. This valve won’t open unless the igniter gave off enough heat to start it up.

Looking at common problems with electronic ignition ovens, there is a wide variety available. For one thing, you might notice that the oven doesn’t warm up enough to cook food. This can be caused by problems with a sensor or with the thermostat in the oven. If the igniter isn’t getting warm enough the valve that needs to open will not do so. When this happens, the burner won’t open as quickly, causing the stove surface to not heat up as quickly as it should.

Something else that often happens is that the heat won’t turn on at all in the oven. This can happen if the glow bar is not working as it should, by not letting off the gas that it should be. Another thing that you might notice with your electronic ignition oven is that it might make a clicking sound when you turn it on. This is normal because it’s the sound of a switch within the oven closes to start a countdown for igniting the stove. Appliance repair technicians can be very useful for these fixes.

Direct Spark Oven

The direct spark oven is very beneficial because it allows the appliance system to turn on a lot quicker, while operating at the most accurate temperatures. This type of stove uses a DSI control mechanism, which essentially causes an arc in the electricity to turn on the burner. The igniter within the direct spark oven is a lot like a spark plug because it is next to the burner and turns on when the light arc reaches the gas within the stove. The gas distribution valve in this type of oven uses solenoids to give off the gas that is needed to power the oven.

Some issues that people often experience with the direct spark oven are that the igniter will stop working and it won’t cause a spark. Another possible issue is that the DSI controller stops sending out the right amount of energy to the solenoids. Problems can also include trouble with the valve that distributes the gas not functioning and the shut off switch for the gas not working. If you experience this, check to make sure there is nothing blocking the drawer. All of these problems can also be solved by professional appliance repair Staten Island engineers.

Pilot Ignition Oven Systems

The pilot ignition surface burner works without a thermocouple. The valve is opened manually by the person who is using the stove. When the person turns the knob the gas is released by at the correct flow rate, dictated by the knob setting. Next, the gas is released through some holes in the burners. This ignites a couple of pilot flames, each for different burners on the top of the stove. If you allow the ignition tube in this kind of oven to get food built up in it, this might reduce the stoves ability to light the flame. An easy fix for this might be to just use a needle to clean the little holes in the burner which might get the grime cleared out of them. You can also change the size of the flame by using a screw control on the tubing that supplies the gas. This can help you to control how big the flame gets as well as control the temperature. You can get the pilot ignition oven system fixed if required by appliance repair specialists in Staten Island.

Continue Reading