SubZero 700TC – Water pools at bottom of refrigerator

I initially purchased the unit used and since day 1 it has an issue with condensation? resulting in a pool of water on the bottom of the refrigerator section. I did some research and replaced the gasket. Still no fix. I had subzero techs come out but they want to charge almost 2k initially to get it fixed. I then went with a handy man after the top of the unit was collecting condensation. Handyman used a heat gun to mold the gasket and it worked for top part only. I still have condensation pooling on bottom and lower hinge is starting to rust.

What can I do!?


Source: New feed

Continue Reading

DBC039A1BDB Danby Beverage Center Not Cooling Below 50F

Hi, I’m new to the thread. I searched but could not find the answer to my problem. I have a Danby Beverage Center (4.5 cu ft mini fridge) that will no longer cool below 50F (normal down to 39F). The compressor runs full time and gets hot over time. The coils inside the fridge get cold and the fan is running and blowing cold air. I have tried unplugging and let sit for several days but this does not help. Is it possible there is something wrong with the control board? Does it have a defrost mode that might be stuck on? Does this have a condenser fan I am not aware of? Or is it more likely that I just lost some of the AC Charge (R134A). No fittings to test Hi/Lo pressures. I’m not much for soldering fittings on but I’m willing to try if that is the most likely cause (I’ve done basic auto AC). Worst case, I wouldn’t mind paying someone to install fittings and add new charge. Thanks for the help, Jeff.


Source: New feed

Continue Reading

DBC039A1BDB Danby Beverage Center Not Cooling Below 50F

Hi, I’m new to the thread. I searched but could not find the answer to my problem. I have a Danby Beverage Center (4.5 cu ft mini fridge) that will no longer cool below 50F (normal down to 39F). The compressor runs full time and gets hot over time. The coils inside the fridge get cold and the fan is running and blowing cold air. I have tried unplugging and let sit for several days but this does not help. Is it possible there is something wrong with the control board? Does it have a defrost mode that might be stuck on? Does this have a condenser fan I am not aware of? Or is it more likely that I just lost some of the AC Charge (R134A). No fittings to test Hi/Lo pressures. I’m not much for soldering fittings on but I’m willing to try if that is the most likely cause (I’ve done basic auto AC). Worst case, I wouldn’t mind paying someone to install fittings and add new charge. Thanks for the help, Jeff.

Powered by WPeMatico

Continue Reading

Danby Beverage Center Not Cooling Below 50F

Hi, I’m new to the thread. I searched but could not find the answer to my problem. I have a Danby Beverage Center (4.5 cu ft mini fridge) that will no longer cool below 50F (normal down to 39F). The compressor runs full time and gets hot over time. The coils inside the fridge get cold and the fan is running and blowing cold air. I have tried unplugging and let sit for several days but this does not help. Is it possible there is something wrong with the control board? Does it have a defrost mode that might be stuck on? Does this have a condenser fan I am not aware of? Or is it more likely that I just lost some of the AC Charge (R134A). No fittings to test Hi/Lo pressures. I’m not much for soldering fittings on but I’m willing to try if that is the most likely cause (I’ve done basic auto AC). Worst case, I wouldn’t mind paying someone to install fittings and add new charge. Thanks for the help, Jeff.


Source: New feed

Continue Reading
1 5 6 7 8 9 19